램에 대해 좀 아시는분..

...

램 정보를 알아내기위해 1달동안 씨름하는중입니다..

아무리 쑈를 해도 본체는 뜯을 엄두를 못내겠고..

램이 256인데 128램을 사려고 합니다. (256램이나 512램 사라는 말씀은 ㄴㄴ)

그런데 제 램하고 같은 속성에 램을 사야한다고 알거든요.

지금 제 램정보를 이것밖에 모릅니다..

DDR램인데다가 256램..

pc2100인지 pc2700인지..그것만 알면

128램도 pc2100인지 pc2700으로 하나 장만해서 끼울텐데..

이 밑에 산드라라는 프로그램으로 뽑은건데

램 128을 하나 새로 끼기 위해서 필요한 정보들만

가르쳐주시면 정말 감사하겠습니다.



System
Manufacturer : System Manufacturer
Model : System Name
Version : System Version
Serial Number : SYS-1234567890
ID : 00000000-00000000-00000000-00000000

System Chassis
Manufacturer : Chassis Manufacture
Type : Tower
Can be locked : No
Version : Chassis Version
Serial Number : Chassis Serial Number
Asset Tag : Asset-1234567890
Boot-up State : Safe
Power State : Safe
Thermal State : Safe

Mainboard
Manufacturer : ASUSTeK Computer INC.
MP Support : No
Model : A7N266VM
Version : REV 1.xx
Serial Number : xxxxxxxxxxx
System BIOS : 11/19/2002-nForce-A7N266VM

System Memory Controller
Location : Mainboard
Error Correction Capability : None
Number of Memory Slots : 2
Maximum Installable Memory : 512MB
Bank 1 - DIMM 1 : DIMM Synchronous DRAM 256MB/72
Bank 2 - DIMM 2 : Empty

Chipset 1
Model : Nvidia Corp nForce AGP Controller
Bus(es) : AGP PCI IMB USB i2c/SMBus
Front Side Bus Speed : 2x 133MHz (266MHz data rate)
Maximum FSB Speed / Max Memory Speed : 2x 133MHz / 2x 133MHz
Width : 64-bit
IO Queue Depth : 8 request(s)

Chipset 1 Hub Interface
Type : HyperTransport
Version : 0.10
In/Out Width : 8-bit / 8-bit
Speed : 2x 200MHz (400MHz data rate)

Logical/Chipset 1 Memory Banks
Bank 1 : 256MB DDR-SDRAM 2.5-3-3-6CL
Channels : 1
Bank Interleave : 2-way
Speed : 2x 133MHz (266MHz data rate)
Multiplier : 1/1x
Width : 64-bit
Power Save Mode : No
Fixed Hole Present : No

APIC 1
Version : 1.01
Maximum Interrupts : 24
IRQ Handler Engaged : Yes
Enhanced Support : Yes

Environment Monitor 1
Model : Asus AS99127F SMB
Version : 3.01
Mainboard Specific Support : No

Temperature Sensor(s)
Board Temperature : 38.0°C / 100.4°F
CPU Temperature : 59.0°C / 138.2°F

Cooling Device(s)
Auto Fan Speed Control : No
Chassis Fan Speed : 2872rpm

Voltage Sensor(s)
CPU Voltage : 1.70V
Aux Voltage : 1.71V
+3.3V Voltage : 3.33V
+5V Voltage : 4.97V
+12V Voltage : 11.67V
-12V Voltage : -15.94V
-5V Voltage : -6.12V

AGP Bus(es) on Hub 1
Version : 2.00
Speed : 4x
Fast-Writes Enabled : No
Fast-Writes Support : Yes
Side Band Enabled : No
Side Band Support : Yes
Aperture Size : 64MB

PCI Bus(es) on Hub 1
Version : 2.20
Number of Bridges : 2
PCI Bus 0 : PCI (1/1x PCIClk)
PCI Bus 1 : PCI (1/1x PCIClk)

LPC Hub Controller 1
Model : Nvidia Corp nForce HUB Interface
ACPI Power Management Support : Yes
ACPI Power Management Enabled : No
DMA Multiplier : 1/2x

USB Controller 1
Model : Nvidia Corp nForce OHCI USB Controller
Version : 1.00
Interface : OHCI
Channels : 3
Supported Speed(s) : Low (1.5Mbps) Full (12Mbps)
Legacy Emulation Enabled : No

USB Controller 2
Model : Nvidia Corp nForce OHCI USB Controller
Version : 1.00
Interface : OHCI
Channels : 3
Supported Speed(s) : Low (1.5Mbps) Full (12Mbps)
Legacy Emulation Enabled : No

USB Controller 3
Model : VIA Technologies Inc VT6202 USB Controller
Version : 1.10
Interface : UHCI
Channels : 2
Speed : 48MHz
Supported Speed(s) : Low (1.5Mbps) Full (12Mbps)
Legacy Emulation Enabled : No

USB Controller 4
Model : VIA Technologies Inc VT6202 USB Controller
Version : 1.10
Interface : UHCI
Channels : 2
Speed : 48MHz
Supported Speed(s) : Low (1.5Mbps) Full (12Mbps)
Legacy Emulation Enabled : No

USB Controller 5
Model : VIA Technologies Inc VT6202 USB 2.0 Enhanced Host Controller
Version : 2.00
Specification : 0.95
Interface : EHCI
Channels : 4
Companion Controllers : 2
Supported Speed(s) : Low (1.5Mbps) Full (12Mbps) High (480Mbps)
Addressing Support : 32-bit
Legacy Emulation Enabled : No

System SMBus Controller 1
Model : nVidia MCP B0 SMBus
Version : 0C.01
Advanced TCO Mode Enabled : No
Slave Device Enabled : No
PEC Support : No

System SMBus Controller 2
Model : nVidia MCP B1 SMBus
Version : 0C.01
Advanced TCO Mode Enabled : No
Slave Device Enabled : No
PEC Support : No

Expansion Slot(s)
PCI 1 (1h) : PCI 32-bit +5V +3.3V PME Half-Length Available (Nvidia Corp nForce HUB Interface)
PCI 2 (2h) : PCI 32-bit +5V +3.3V PME Half-Length Used (Nvidia Corp nForce OHCI USB Controller)
PCI 3 (3h) : PCI 32-bit +5V +3.3V PME Half-Length Available (Nvidia Corp nForce OHCI USB Controller)
AGP (4h) : AGP-4x 32-bit +3.3V PME Half-Length Available

Port Connector
PRIMARY IDE/HDD : None - ATA / None
SECONDARY IDE/HDD : None - ATA / None
FLOPPY : None - Floppy Disk / None
LAN-00E018000050 : Network - None / RJ-45
USB1 : USB - None / USB
USB2 : USB - None / USB
PS/2 Keyboard : Keyboard - None / PS/2
PS/2 Mouse : Mouse - None / PS/2
Parallel Port : Parallel Port ECP/EPP - None / DB-25 pin female
Serial Port 1 : Serial Port 16550 - None / DB-9 pin male
Serial Port 2 : Serial Port 16550 - None / DB-9 pin male
Joystick Port : Joystick - None / DB-15 pin female
MIDI Port : MIDI - None / DB-15 pin female
Video Port : Video - None / Mini-jack

Performance Tips
Notice 224 : SMBIOS/DMI information may be inaccurate.
Warning 2507 : Mainboard has too few memory slots. Upgrading the memory may be difficult or expensive.
Tip 2511 : Some memory slots are free so the memory can be easily upgraded.
Tip 2 : Double-click tip or press Enter while a tip is selected for more information about the tip.